By Steve Bush 12th January 2022
Sensor Technology has introduced a torque sensor that has the sensing head and electronics in separate housings.
“This has two advantages,” according to the Oxfordshire company: “the sensing head can fit into very confined spaces, and the electronics can be located in a position where they are protected from physical damage, dust, dirt, moisture and electromagnetic forces.”
TorqSense SGR530 and SGR540 operate on the same four element strain gauge bridge principle as the company’s SGR510 and SGR520 ranges – introduced in 2020 as the successor to its earlier surface acoustic wave RWT type.
Shaft sizes range from 6 to 75mm and full-scales from 1Nm to 13,000Nm.
Four individual stain gauges are attached to the drive shaft, each measuring deflection in a different direction as it rotates under load. The electronics collects readings from all four gauges and calculates torque. Gauge positioning compensate for extraneous forces such as bending moments.
Signals get from the rotating shaft to the static electronics through radio frequency wireless pick-ups rather than slip-rings – a rotor mounted microcontroller, powered by through an inductive coil, measures the strain gauges and transmits digital values back through the same coil.
“Advantages include 400% mechanical overload limit, with accurate torque measurement even at these extremes, and multipoint calibration to eliminate linearity errors within the sensor,” according to the company.
Accuracy is ±0.1% and resolution ±0.01% of full scale. Power can be supplied between 12 and 32Vdc.
SGR53x and SGR54x offer different interface options amongst analogue voltage, analogue current, RS232, USB, CANbus and Ethernet.
While some versions only output torque, other deliver speed pulses (60pulse/rev) or power information. 360pulse/rev versions are planned.
The new range is designed to accurately track transient torque spikes.
“A single spike could indicate say the wrong amount of an ingredient being added to a compound or an over-sized workpiece, both of which could affect product quality,” according to company spokesman Mark Ingham. “A series of spikes would probably suggest the beginnings of a problem within the machinery, so their detection gives the plant engineers an early warning.”
Software includes TorqView and integration with LabView virtual instruments.
The SGR530 and SGR540 product page is here
Tagged with: sensor UK manufacturing
Your email address will not be published. Required fields are marked *
Get our news, blogs and comments straight to your inbox! Sign up for the Electronics Weekly newsletters: Mannerisms, Gadget Master and the Daily and Weekly roundups.
Read our special supplement celebrating 60 years of Electronics Weekly and looking ahead to the future of the industry.
Read the Electronics Weekly @ 60 supplement »
Read the first ever Electronics Weekly online: 7th September 1960. We've scanned the very first edition so you can enjoy it.
Read the very first edition »
Electronics Weekly teams up with RS Grass Roots to highlight the brightest young electronic engineers in the UK today.
Read our special supplement celebrating 60 years of Electronics Weekly and looking ahead to the future of the industry.
Read the Electronics Weekly @ 60 supplement »
Read the first ever Electronics Weekly online: 7th September 1960. We've scanned the very first edition so you can enjoy it.
Read the very first edition »
Tune into this Xilinx interview: Responding to platform-based embedded design
Tune into this podcast to hear from Chetan Khona (Director Industrial, Vision, Healthcare & Sciences at Xilinx) about how Xilinx and the semiconductor industry is responding to customer demands.
By using this website you are consenting to the use of cookies. Electronics Weekly is owned by Metropolis International Group Limited, a member of the Metropolis Group; you can view our privacy and cookies policy here.